We, EXW are a professional team dedicated to give our customers the best solution. With strong design and mold fabrication teams, we are ready to develop new products together with our esteem customers, as well as to provide the best OEM / ODM service.
You can find some answer here by our FAQ, and these are also what we can provide to you .
The reason why we call the arch latch passing through design RJ45 plug is a wonderful design is it is easy to assemble as a patch cord even you are an enduser and never have had such an experience for doing this. You only need to put all the wires into the plug by the correct wire position. Then by using our hand tool, it only takes a few seconds, the wires will be cut off and the stain relief will be stock the cable into the plug stably.
The arch latch could save your budget to buy plug boot because it could protect itself. Of course, we still give you some option for plug boot which is designed for this plug. We have two type of plug boot which are the model 01-147 and 01-163. These two type of plug boot could make your patch cord a different outlook. By using our tool, you can assemble the plug with the plug boot easily.
If you have any demand for having a logo on the plug, we can do it for you. OEM or ODM are welcome.
While we are still struggling from what Covid-19 bring to our life, EXW would like to give our customers a safer solution to make us stay healthy. We can add the antibacterial powder to mix with our raw material, for example, PC for our plug and boot, PVC and LSOH for our outer jacket of patch cord, and while doing molding as well.
By adding this process of production, our products could resist Escherichia coli and Staphylococcus aureus that could shorten those bacterial alive on the surface of our products for a long time. We, EXW keep trying to give our customers a high quality and trustable products.
EXW takes care of you, us, and all the people in the world. We believe one day; we can overcome this difficult situation.
From the draft of the ANSI-TIA568.2-D standard, there is a new link model named Modular Plug Terminated Link. TIA-568-C.2 required that horizontal cable be terminated on a telecommunications outlet to provide flexible access to the user, however in certain limited condition there might be a need to terminate horizontal cables with a plug and directly plugged into the device.
“MPTL configuration as “direct connect” , this method direct connects IP devices to the network. ” The MPTL test is using the Permanent Link adapter on one end and a Patch Cord adapter on the other end. The links are tested against the TIA Permanent Link limits.
Yes, we can provide cat.8 keystone jack & toolless plug to match with your cat.8 channel test. So far we tested our cat. 8 keystone jack and field termination plug with CAT.8 cable by Fluke DSX8000 based on EIA/TIA 568C.2-1 channel test.
The test method as below:
EXW's Cat 8 RJ45 solutions are designed to support Ethernet at rates up to 40 Gbps (40GBASE-T) for the short distances up to 30 meters, which is a solution primarily for data centers. The Copper cabling solution is less costly for installation for the power usage and electronics costs. We do expect that in the future, Cat 8 solution becomes widely used, the switch and server connections supporting it will be much less expensive than fiber optics solutions. Besides, the 25/40GBASE-T standards support autonegotiation, which provides convenience for data center users.
EXW provides you a few options to assembly large size copper cable. For the Cat 6A solution, our Cat6A STP Larger Diameter RJ45 Connector (P88R5Z50V2SIT-3Y-1.5MM) and Cat 6A STP Blue Field Termination RJ45 Connector (3J01-K01-00001) must be your best choice. For the Cat 8 solution, our Cat8 STP Field Termination RJ45 Connector (3J01-K01-00017) definitely matches your demand. The solutions for large size cable we EXW provides is from cable range 22AWG to 26AWG. For more detail information, you may kindly click the pictures below.
We use only pure bare copper on patch cables to guarantee our quality, we do not use any CCA or CCS or other materials.What is CCA wire?
CCA is the abbreviation for “Copper clad aluminum＂wire.
Compare to pure copper wire, CCA wire is cheaper and in lower weight. However, the tensile strength of CCA wire is also lower than that of pure copper wire, and it is easier to be broken down. It may also cause transmission failure in construction.
Even it is claimed to have the same conductivity with “slightly” higher resistance, there will be data loss in the transmission. This will cause the transmission speed to slow down and it won’t able to meet the transmission speed requirements in the long run.As more and more data is transmitted over the Internet cable and the application of PoE, these problems will eventually emerge. Long-term and reliable partnerships are not an easy job, we insist to pure copper wire only, with 100% component test. We provide reliable products to our partners and continue to deliver good quality products to our customers.
We do 100% component test for cat. 6 & 6A patch cords to guarantee our quality! We have very strong R&D team, we can provide professional OEM & ODM service for our esteem customers.
Per FCC standard, it is suggested to use 50U" (1.27um) gold plated on the contact area in order to provide better contact between male RJ45 plug and female jack. Also 50U" gold plating RJ connector can meet the reliability test based on IEC 60603-7.
Yes, we do. Our RJ45 waterproof network connectors' solution is IP68 compliant, our network parts are prevented from moisture, dirt and insects for quality connections. Prevented from temporary immersion for 60 minutes and 1.5 meter depth of water.
EXW has three prong design contact blade which can fit both stranded and solid cable. You can save your budget for stocking two type of blade's plug. The base material of our blade is nickel which the thickness of nickel is 60U"~90U". And we can provide you the gold plate which the thickness of gold could be up to 50U".