MTP®/MPO to LC Harness | Network Infrastructure Solution | EXW
Explore MTP®/MPO to LC Harness from EXW, designed for professional network infrastructure, data center, telecommunications, and connectivity applications. Contact our team for product specifications, configuration options, availability, and support for your project requirements.
MTP®/MPO to LC Harness
Pre-Terminated MTP®/MPO to LC Fanout Harness for Cassettes, Racks and Backbone Links
An MTP®/MPO harness breaks one multi-fiber MPO connector out into individual LC connectors, so a parallel-optic trunk can connect to duplex equipment ports, patch panels or cassette modules. EXW builds three harness constructions: 0.9 mm fibers for use inside cassette modules, 2.0 mm round-cable legs for patching from the trunk to the rack, and multi-fiber trunk harnesses for backbone runs. Polarity is specified at order (Type A, B or C), and every harness is factory-terminated and tested before shipment.
Specifications
- MTP®/MPO connector: 8, 12, 16, 24 or 32 fibers.
- Other end: LC connectors, simplex or duplex.
- Three constructions: 0.9 mm fibers for cassette modules, 2.0 mm round-cable legs for patching, and multi-fiber trunk harnesses for backbone runs.
- Fiber types: OM3, OM4 and OM5 bend-insensitive multimode (BIMMF), and OS2 G.657.A single mode.
- Polarity: Type A, Type B, Type C, or customized, as defined in ANSI/TIA-568.3-E.
- MTP®/MPO connector options: US Conec MTP® or MPO-compatible; male (with pins) or female (unpinned).
- Performance grades: Standard Loss and Low Loss; see the insertion loss and return loss tables.
- Breakout leg length, overall length and pulling eye (trunk harness) available on request.
Mechanical Characteristics
- Reliable high-density interconnection for: transitions from MTP®/MPO trunk cabling to duplex equipment ports, patch panels and cassette modules in data center main, horizontal and zone distribution areas; telecommunications networks and broadband/CATV networks.
Note
- Fiber Compatibility: OM3, OM4, OM5 (BIMMF) and OS2 G.657.A
Which Harness Construction Do You Need?
All three harness constructions break an MTP®/MPO connector out into LC connectors. They differ in the cable on the breakout side and where the harness is installed.
| Construction | Breakout side | Typical installation |
|---|---|---|
| Cassette harness | 0.9 mm fibers to simplex LC connectors | Inside plug-and-play fiber cassette modules |
| Patch harness | 2.0 mm round-cable legs to simplex or duplex LC connectors | From the trunk to the rack or equipment |
| Trunk harness | Multi-fiber cable fanned out at one end; pulling eye on request | Backbone runs with MPO at one end and LC at the other |
Connecting to a parallel transceiver? ANSI/TIA-568.3-E Annex C describes using unpinned (female) MPO connectors on the cords that plug into equipment, because currently known parallel transceiver receptacles are pinned. Specify the connector gender at order.
MTP®/MPO Insertion Loss and Return Loss Grades
Maximum insertion loss per MTP®/MPO connector mating, with the minimum return loss for each grade.
| Grade / Fiber Type | Standard Loss | Low Loss |
|---|---|---|
| Insertion loss — BIMMF OM3 / OM4 / OM5 (Multimode) | ≤ 0.50 dB | ≤ 0.35 dB |
| Insertion loss — SM OS2 G.657.A (Single-mode) | ≤ 0.75 dB | ≤ 0.35 dB |
| Return loss — BIMMF OM3 / OM4 / OM5 (Multimode) | ≥ 20 dB | ≥ 20 dB |
| Return loss — SM OS2 G.657.A (Single-mode) | ≥ 60 dB | ≥ 60 dB |
LC Insertion Loss and Return Loss Grades
For the LC connectors on the breakout side of the harness.
| Grade / Fiber Type | Standard Loss | Low Loss |
|---|---|---|
| Insertion loss — BIMMF OM3 / OM4 / OM5 (Multimode) | ≤ 0.30 dB | ≤ 0.15 dB |
| Insertion loss — SM OS2 G.657.A (Single-mode) | ≤ 0.20 dB | ≤ 0.15 dB |
| Return loss — BIMMF OM3 / OM4 / OM5 (Multimode) | ≥ 35 dB | ≥ 35 dB |
| Return loss — SM OS2 G.657.A (Single-mode) | ≥ 55 dB | ≥ 55 dB |
These are EXW product grades. ANSI/TIA-568.3-E Annex A sets a maximum of 0.75 dB insertion loss per mated connector pair, applying the same limit to MPO array connectors and single-fiber connectors.
How to Order an MTP®/MPO to LC Harness
Each harness is built to order. Specify the following when requesting a quotation so the assembly arrives ready to install without field adaptation.
| Step | Parameter | Options |
|---|---|---|
| 1 | MTP®/MPO fiber count | 8 / 12 / 16 / 24 / 32 |
| 2 | Fiber mode | Single mode: OS2 G.657.A (yellow). Multimode: OM3 (aqua), OM4 (violet), OM5 (lime green). |
| 3 | Construction | Cassette harness (0.9 mm fibers) / Patch harness (2.0 mm legs) / Trunk harness (multi-fiber cable) |
| 4 | LC connectors | Simplex or duplex |
| 5 | MTP®/MPO connector | US Conec MTP® or MPO-compatible; male (with pins) or female (unpinned) |
| 6 | Polarity | Type A / Type B / Type C / Customized |
| 7 | Performance grade and length | Standard Loss / Low Loss; breakout leg length and overall length in feet or meters |
MTP® is a registered trademark of US Conec Ltd.
- Related Products
MTP®/MPO Trunk Cable
MTP®/MPO trunk cables deploy a high-density permanent link in a single factory-terminated...
Details Add to List
MTP®/MPO Array Cable
Every array cable is factory-terminated and individually tested before shipment, so link loss...
Details Add to List
LC A/B Switchable Fiber Patch Cord
The LC A/B Switchable Fiber Patch Cord lets you reverse duplex polarity at the connector, from...
Details Add to List
1U 144 Port MTP to LC High Density Angled Patch Panel
The 1RU 144 Port MTP/MPO to LC OM3/OM4/OM5/OS2 Angled Fiber Patch Panel is engineered for elite...
Details Add to List
Fiber Optic Mini Breakout Cable
002 mini break out cable is the very compact and space saving cable distributor because the cable...
Details Add to List- FAQ
Category 8 Solutions for Future Networks
Category 8 RJ45 solutions are designed to support Ethernet at rate up to 40 Gbps (40GBASE-T) for short distances up to 30 meters, which is a solution primarily...
All of EXW Patch Cords Use Bare Copper Wires
All of EXW patch cords use pure bare copper wires. EXW patch cords do not use CCA (copper clad aluminum) wires nor do we recommend using patch cords made...
- Files Download
MTP MPO to LC Harness Spec Sheet
MTP®/MPO to LC harness, trunk, array and QSFP conversion cables: loss grades and ordering options
Download
Download Best-Selling
How can MTP®/MPO to LC Harness support your network infrastructure requirements?
EXW provides MTP®/MPO to LC Harness for professional network infrastructure, data center, telecommunications, and connectivity applications. Designed to support reliable installation and integration, this product can be incorporated into a wide range of network projects according to specific system, application, and deployment requirements. Our team works with customers to identify suitable product configurations for new installations, infrastructure upgrades, and customized networking projects.
MTP®/MPO to LC Harness is suitable for data center operators, telecommunications providers, system integrators, network installers, distributors, and other professional buyers seeking dependable network infrastructure solutions. Product specifications, configurations, quantities, and customization requirements can be discussed according to your project needs. Contact EXW for product information, technical details, availability, and assistance in selecting the appropriate solution for your network application.