SKU

3J01-A01-00207 (23-26 AWG) / 3J01-A01-00208 (23-26 AWG, Shutter) / 3J01-A01-00209 (22-24 AWG) / 3J01-A01-00210 (22-24 AWG, Shutter)

Foolproof Cat6A Keystone Jack With Patented Lockable Cable Clamp

Cat6A RJ45 keystone jack has a foolproof cap that has different notches on the two sides of the cap and prevents the cap from being misplaced. It minimizes the occurrence of incorrect twisted pair wiring. The foolproof notches also lock the cap in place when the keystone jack is unused. Without an intended and strong pull on the cap, the cap stays still in the keystone jack. The cable clamp replaces the use of cable zip ties. It achieves easy and fast grounding with a small cable clamp. It tightens the cable and attaches the drain wire to the copper foil. The keystone jack shortens the installation time while reducing the use of non-recyclable cable zip ties.

Force-Balance Mechanism for Quick Tool-Free Cat6A Installation

The force-balance mechanism allows the IDC cap to easily sit flat on the IDC housing before technicians snap it in and terminate the keystone jack. The new design has 2 small protruded pyramids on the IDC cap and 2 rectangular holes on the IDC housing. A simple press on the IDC cap to lock the protruded pyramids on the holes before closing the shielded housing of the keystone jack enables equal downward force exerted on the cap.

Cat.6A Keystone Jack With Short Circuit Protection

The new structure design enables short circuits protection by securely separating exposed wires from the shielded housing of the keystone jack. The walls next to the two rows of IDCs can effectively cover the ends of the wires to achieve complete insulation and to prevent excessive current from flowing through an unintended path. The circuit protection feature minimizes equipment repair and downtime. It also prevents shock hazard and electrical fires.

FORCE Certified 4PPoE Cat6A RJ45 Jack

CAT6A 4PPoE FORCE certified screened ethernet RJ45 keystone jack can deliver up to 90 watts of power and high speed data signal at 10 Gbps to PoE devices such as LED lighting, wireless access points (WAPs), IP cameras, and VoIP phones. High bandwidth and high power given by a PoE++ RJ45 ethernet keystone jack come in handy when you have a powered device (PD) installed in places that are further away from the power source and difficult to acquire power. The Cat.6A shielded keystone jack is standards compliant. (IEC 60603-7-51, IEEE 802.3bt Type 4 Class 8, and IEC 60512-99-002:2022) You do not have to have a network engineer to run data through your cables and hire an electrician to run power that costs money. With PoE++, you can do everything on one cable.

FORCE Verified Connecting Hardware Cat6A Network Jack

CAT6A STP network jack is a FORCE Technology verified ANSI/TIA 568.2-D connecting hardware. This Category 6A shielded RJ45 keystone jacks comply with IEC 60603-7-51 and support all applications designed for Class EA (Category 6A) networks, as defined within ISO/IEC 11801 including 10GBASE-T (10 Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet).

Order Terms

• Minimum Order Quantity: 2,000 pieces
• Minimum Order Amount per Shipment: US$ 5,000

Excluded Shipping Locations

• The Czech Republic
• Slovakia (the Slovak Republic)

Certificates

• FORCE
• UL
• CE
• RoHS
• REACH

Power Over Ethernet

• Maximum Power from PSE: 90 W
• Maximum Power at PD: 71.3 W
• Number of Energized Pair: 4
• IEEE 802.3bt Type 4 Class 8 (PoE++)
• IEC 60512-99-002:2022

Spec Sheet

• Contact Pins (conductors) Material: phosphor bronze with nickel plating
• Gold Plating Thickness: 50 microinches
• Shielded Housing: yes (zinc die-casting with nickel plating)
• IDC Housing Material: polycarbonate
• IDC Housing Color: gray
• IDC Terminals: Phosphor bronze with tin plating
• IDC Cap Material: polycarbonate
• IDC Cap Color: white/gray
• Cable OD Range: 5.5 to 8.5 mm
• Cable Compatibility: 23 to 26 AWG or 22 to 24 AWG stranded and solid cables

Characteristics

• Mating Cycles: 750 cycles
• Installation Cycles (IDC): 20 cycles
• Mating Force: ≤ 30 N
• Retention Strength: 7.7 kg between jack and plug
• Storage Temperature: -40°C to 70°C (-40°F to 158°F)
• Installation Temperature: 0°C to 50°C (32°F to 122°F)
• Operating Temperature: -10°C to 60°C (14°F to 140°F)

International Standards Compliant

• IEC 60512-99-002:2022
• IEEE 802.3bt Type 4 Class 8
• ANSI/TIA-568.2-D
• ISO/IEC 11801
• IEC 60603-7
• EN 50173-1
• EN 50173-2
• IEC 61935-2
• ANSI/TIA-1096-A (formerly FCC Part 68.5 Subpart F)

Related Products

1U 24 Port FTP Foldable V-Angle RJ45 Blank Panel

Angled blank panel for Cat 5E, Cat 6, and Cat.6A keystone jacks and inline couplers. The foldable...

Details Add to List

Cat.6A S/FTP 10G 30 Gauge Patch Cord

For high speed connection in high density data centers, the UL certified ethernet patch cord...

Details Add to List

Tool Recommendations

Coax and Copper Network Cable Cutter

The cable cutter is ideally used for copper network UTP and STP twisted pair cables with cable...

Details Add to List

Files Download

Cat.6A STP 180 Degree Tool Free Keystone Jack With Cable Clamp (23-26 AWG)

Drawing of C6A STP Toolless Keystone Jack With Cable Clamp

Download

Cat.6A STP 180 Degree Tool Free Keystone Jack With Cable Clamp (23-26 AWG, With Shutter)

Drawing of C6A STP Toolless Keystone Jack With Cable Clamp

Download

Cat.6A STP 180 Degree Tool Free Keystone Jack With Cable Clamp (22-24 AWG)

Drawing of C6A STP Toolless Keystone Jack With Cable Clamp

Download

Cat.6A STP 180 Degree Tool Free Keystone Jack With Cable Clamp (22-24 AWG, With Shutter)

Drawing of C6A STP Toolless Keystone Jack With Cable Clamp

Download

FORCE Certified Category 6A Connecting Hardware Toolless Keystone Jack

FORCE Certificate of Cat.6A RJ45 Keystone Jack

Download

FAQ

All of EXW Patch Cords Use Bare Copper Wires

All of EXW patch cords use pure bare copper wires. EXW patch cords do not use CCA (copper clad aluminum) wires nor do we recommend using patch cords made...